Moen S62308BL 仕様シート
6-3/16"
(157mm)
14-5/8"
(371mm)
5-5/16"
(135mm)
7-7/8"
(200mm)
2-1/2" (63mm)
Max Deck Thickness
2-1/4"
(57mm)
7"
(178mm)
2-1/4"
(57mm)
31-5/8"
(803mm)
3-3/4"
(95mm)
1-1/8"
(27mm)
1-3/16"
(28mm)
stō
single Handle High arc
Pulldown Prep/Bar Faucet
models: S62308 series
note: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, 1-1/2” (38mm) MIN. DIA.
S p e c i fi c at i o n s
to order Parts call: 1-800-BUY-moen
www.moen.com
FaUcet descriPtion
• Reflex™ pulldown system offers smooth operation, easy movement and
secure docking
• Metal construction with various finishes identified by suffix
• Quick connect installation
• Pulldown spray with 68" braided hose
• Flexible supply lines with 3/8" compression fittings
• High arc spout provides the perfect height and reach for prep sinks while the
• Quick connect installation
• Pulldown spray with 68" braided hose
• Flexible supply lines with 3/8" compression fittings
• High arc spout provides the perfect height and reach for prep sinks while the
pulldown feature provides maneuverability for food preparation tasks
• 360˚ rotating spout
• Faucet designed for handle to be mounted on right side
• Faucet designed for handle to be mounted on right side
oPeration
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
FloW
•
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
cartridGe
• 1255™ Duralast™ cartridge for Single-Handle Faucets
standards
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF 61/9G
•
Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
•
ada
for lever handle
WarrantY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
critical dimensions
(DO NOT SCALE)
5/13