Whirlpool WFW95HEDW 使用とお手入れ

The FanFresh

®

 option will periodically tumble the load after 

the end of the cycle for up to 12 hours while the integrated 

fan circulates air through the washer to reduce humidity.  

To turn on the FanFresh

®

 option, touch FanFresh. If,  

however, the FanFresh

®

 option is turned on, it will stay  

on for all future cycles until turned back off – the washer  

remembers the last on/off status set. To turn off the  

FanFresh

®

 option, touch FanFresh.

You may also activate the FanFresh

®

 option without running 

a cycle by touching and holding POWER for one second, 

then touching and holding FanFresh

 

for 3 seconds, then 

touching and holding START for 3 seconds. 
To turn off the FanFresh

®

 option when it is running, touch 

POWER.
NOTE: The door will lock while the FanFresh

®

 option is  

active. To cancel the option and unlock the door, touch 

POWER.
TumbleFresh

The TumbleFresh

™

 option will periodically tumble the  

load after the end of the cycle for up to 6 hours to reduce 

humidity. To turn on the TumbleFresh

™

 option, touch  

TumbleFresh. If, however, the TumbleFresh

™

 option is 

turned on, it will stay on for all future cycles until turned  

back off – the washer remembers the last on/off status set. 

To turn off the TumbleFresh

™

 option, touch TumbleFresh.

You may also activate the TumbleFresh

™

 option without  

running a cycle by touching and holding POWER for one 

second, then touching and holding TumbleFresh

 

for 3  

seconds, then touching and holding START for 3 seconds. 
To turn off the TumbleFresh

™

 option when it is running, 

touch POWER.
NOTE: The door will lock while the TumbleFresh

™

 option is 

active. To cancel the option and unlock the door, touch 

POWER.
Extra Rinse 

Activate this option to add an extra rinse to most cycles.
Cycle Signal

Use this option to turn on or off the signal that sounds  

at end of cycle.
To turn off the tones that sound when a setting is 

touched: Touch and hold CYCLE SIGNAL for about  

3 seconds. Repeat to turn them on.
Control Lock 

Touch and hold for 3 seconds to lock the controls to avoid 

unwanted changes or operation. Touch and hold 3 seconds 

again to unlock. For each second CONTROL LOCK is 

held down, the display will count down one second: you 

will see “3,” then “2,” then “1.” You can still touch START 

to pause the cycle, or touch POWER to turn off the washer.

When you select a cycle, its default settings will light up and 

the Estimated Time Remaining will be displayed. Factors such 

as load size, wash temperature, and water pressure may affect 

the time shown in the display during the cycle. Tightly packing 

garments, unbalanced loads, or excessive suds may cause the 

washer to adjust the cycle time, as well. 
Touch the desired setting along the bottom of the display to 

adjust. See “Cycle Guide” for available settings on each cycle. 

Not all settings are available with all cycles.

For details, see the “Cycle Status Lights” section on the  

next page.
Wash Temp 

The recommended wash temperature is preset for each 

cycle. You may also select a wash temperature based on 

the type of fabric and soils being washed. For best results, 

follow the garment label instructions. All wash temperatures 

feature a cold rinse.
Spin

This washer automatically selects the spin speed based on 

the cycle selected. Some preset speeds can be changed. 
•  Faster spin speeds mean shorter dry times, but may  

increase wrinkling in your load. 

•  Slower spin speeds reduce wrinkling, but will leave  

your load more damp.

The Soil setting (wash time) is preset for each wash cycle. 

For most loads, use this preset soil level. When you change 

the soil setting, the cycle time will increase or decrease in the 

Estimated Time Remaining display. 
For heavily soiled and sturdy fabrics, use the Soil setting to 

select more wash time. For lightly soiled and delicate fabrics, 

use the Soil setting to select less wash time. Lower soil level 

settings will help reduce tangling and wrinkling.
Presoak 

Touch to add a Presoak time of your choice to a wash 

cycle. Items will gently tumble through the detergent and 

water for the selected time to help loosen tough stains.

Touch to activate additional wash options or additional features 

on the washer. Not all options are available on all models.  

The Steam Clean option adds additional soak and wash 

time to many cycles to help remove tough stains, as well 

as a steam boost for added cleaning power. An integrated 

heater helps to maintain optimal wash temperatures. See 

the “Cycle Guide” for cycles that allow the Steam Clean 

option.
EcoBoost

Touch to activate the EcoBoost

™

 option. The EcoBoost

™

 

option provides additional energy savings through reduced 

hot water usage and maintains cleaning performance by 

lengthening the wash time on some cycles.