Viking VGR7488BWHLP インストール手順

The bottom of a standard hood should be

30” (76.2 cm) min. to 36” (91.4 cm) max.

above the countertop. This would

typically result in the bottom of the hood

being 66” (167.6 cm) to 72” (182.9 cm)

above the floor. Refer to the range hood

installation instructions for additional

information. These dimensions provide for

safe and efficient operation of the hood.

Wall Installation

Island Installation

Note: This range comes standard with an Island

Trim. There must be a minimum of 6” (15.2 cm)

clearance from rear of range to a combustible

wall or 0” clearance to a non-combustible wall.

Note: Clearances from non-combustible

materials are not part of the ANSI Z21.1 scope

and not certified by CSA. Clearances to non-

combustible materials must be approved by the

authority having jurisdiction.

Note: Minimum clearance for back wall

is 3/4” (1.9 cm) with backguard or high-

shelf.

• This range may be installed directly

adjacent to existing 36” (91.4 cm) high

base cabinets.

IMPORTANT: The side panel MUST be

3/8” (.95 cm) above the adjacent base

cabinet countertop. This can be

accomplished by raising the unit using

the adjustment spindles on the legs.

• The range CANNOT be installed

directly adjacent to sidewalls, tall

cabinets, tall appliances, or other

side vertical surfaces above

36” (91.4 cm) high. There must be

a minimum of 12” (30.5 cm) side

clearance from the range to such

combustible surfaces above the

36” (91.4 cm) counter height.

• Within the 12” (30.5 cm) side

clearance to combustible vertical

surfaces above 36” (91.4 cm), the

maximum wall cabinet depth

must be 13” (33.0 cm) and wall

cabinets within this 12” (30.5 cm)

side clearance must be

18” (45.7 cm) above the

36” (91.4 cm) high countertop.

• Wall cabinets above the range must be a

minimum of 58” (147.3 cm) above the

range cooking surface for the full width

of the range. This minimum height

requirement does not apply if a range

hood is installed over the cooking surface.

Note: Minimum clearance for back wall is 3/4”

(1.9 cm) with backguard or high-shelf.

Note: If a range hood is installed, wall cabinets above

the range have a different minimum clearance height.

Note: Clearances from non-combustible materials are

not part of the ANSI Z21.1 scope and not certified by

CSA. Clearances to non-combustible materials must be

approved by the authority having jurisdiction.

BURN HAZARD

To avoid risk of personal injury;
the use of cabinets for storage
above the appliance may result

in a potential burn hazard. Combustible
items may ignite, metallic items may
become hot and cause burns. If a cabinet
storage is to be provided the risk can be
reduced by installing a rangehood that
projects horizontally a minimum
5" (12.7 cm) beyond the bottom of cabinets.

Clearance Dimensions

(Wood/Composite Overlay)

Clearance Dimensions

(Proximity to Cabinets)