Maytag MGR8600D オーナーマニュアル

The normal operation of the range will include several noises that 
may be heard each time the Bake or Broil burners ignite during the 
cooking cycle:

■

gas valves may make a “popping” sound when opening or 
closing

■

igniters will “click” several times until a flame is sensed

■

a “poof” sound is heard when a Bake or Broil burner ignites

Odors and smoke are normal when the oven is used the first few 
times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to the 
fumes given off. Exposure to the fumes may result in death to 
certain birds. Always move birds to another closed and well-
ventilated room.

The display will flash when powered up or after a power loss. Press 
CANCEL to clear. When oven is not in use, the time of day is 
displayed, unless the range is in Energy Save mode. During Energy 
Save mode, the display will be blank. Indicator lights show 
functions that are in use.

Tones are audible signals, indicating the following:

■

Valid pad press

■

Oven is preheated (long tone)

■

Function has been entered

■

Reminder (on some models), repeating every 20 seconds after 
the end-of-cycle tones

■

Invalid pad press

■

End of cycle

The Energy Save feature places the control and clock into a Sleep 
mode that reduces power consumption when the range is not 
being used.
To enter the Energy Save mode, the oven and control must be idle 
with the time of day shown on the display. Press and hold CLOCK 
for 10 seconds. The control will beep, and the display will show the 
letters “ES” followed by “On” twice. The display will return to the 
time of day.
If Energy Save mode is activated, each time the range is idle for 
5 minutes with only the time of day shown, the display will show 
the letters “ES” followed by “On” twice. The display will then be 
blank until a control key is pressed or the oven door is opened. The 
control will then perform any of its operations in response to 
additional key presses.
To exit Energy Save mode, press and hold the CLOCK key for 
10 seconds. The control will beep, and the display will show the 
letters “ES” followed by “Off” twice. The display will return to the 
time of day.

IMPORTANT: Do not use a thermometer to measure oven 
temperature because opening the oven door may cause element 
cycling to give incorrect readings.
The oven provides accurate temperatures; however, it may cook 
faster or slower than your previous oven, so the temperature can 
be adjusted to personalize it for your cooking needs. It can be 
changed in Fahrenheit or Celsius.
To Adjust Oven Temperature:

1. Press and hold BAKE for 5 seconds until the oven display 

shows the current setting, for example “0°F CAL” or “00.”

2. Press the Temp/Time “+” or “-” keypads to increase or to 

decrease the temperature in 10°F (5°C or 6°C) amounts. The 
adjustment can be set between 30°F (17°C) and -30°F (-17°C).

3. Press START.

Press and hold KITCHEN TIMER for 5 seconds, and “Opt” will 
appear. Use the Temp/Time “+” or “-” keypads to cycle through the 
following options. Press CANCEL to exit the mode.
Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to 
Celsius. Press KITCHEN TIMER to toggle between Fahrenheit and 
Celsius. Press CANCEL to exit.
End of Cycle Tones

“b1” (beep once) or “b” (continue to beep) will be displayed. Press 
KITCHEN TIMER to toggle through selections. Press CANCEL to 
exit.
Oven Light with Door Open

“LOn” indicates that the oven light will turn on when the door is 
open. If “LOFF” is displayed, the oven light will turn on only with the 
oven light switch. Press KITCHEN TIMER to toggle through 
selection. Press CANCEL to exit.
12-Hour Shutoff

If “12 Hr” is displayed, the oven will automatically shut off after 
12 hours. Press KITCHEN TIMER to toggle to “- Hr” to disable the 
12-hour shutoff. Press CANCEL to exit.