Zephyr ZSPE48AS オーナーマニュアル

www.zephyronline.com

Display (speed level, delay off, filter clean/change)

1  POWER / DELAY OFF BUTTON
       Power Button Function
       -      Button will turn power on and off for entire hood (fan and lights).
       - Hood will remember the last speed and light level it was turned off at.
 

(Example: Press      Button to turn off hood when on fan speed 4 and high lights. Press       Button  

 

again and the hood will turn back on at speed 4 and high lights level.)

       Delay Off Button Function
       - With the fan on press and hold      Button for two seconds. The fan will change to speed 1 and the 5  
         minute delay off timer will start.                 
                    +                                         LEDs will illuminate and slowly blink in accordance with the time  
         remaining until the fan and lights automatically turn off. 
        - Pressing      Button while Delay Off Function is enabled will turn the hood off and cancel the Delay  
         Off Function.

2  SPEED SELECTION BUTTON
       Fan Speed Decrease Button
       - Press this button to decrease fan speed. 5, 4, 3, 2, 1.
       - If fan is On Speed 1 and this button is pressed, fan will power Off.
       Fan Speed Increase Button
       - Press this button to increase fan speed. Fan On, 1, 2, 3, 4, 5.
       - If hood is Off and this button is pressed, fan will turn On Speed 1.   

3  LIGHTS BUTTON
     - Lights are two levels, High and Low.
     - From off, press one time for High. Press again for Low. Press again to power lights off.

4  DISPLAY INDICATORS
     Baffle Filter Clean Reminder (always enabled)
     - After 30 hours of fan usage, the       button indicator will begin to slowly blink indicating it is time to  
       clean the baffle filters. 
     - To reset: With hood off: hold the      button for three seconds. All LED indicators will blink two times  
       confirming the 30 hour timer has been reset.