Bosch NIT5066UC マニュアル

13

The SpeedBoost function can be used to heat large 

amounts of water faster than by using heat level 

Š

.

Limitation on use
This function is available on all elements, provided that 

no other element in the same group is operating, (see 

picture). If this is not the case, the 

›

 and 

Š

 symbols will 

flash on the selected element display; then it will 

automatically set the power level 

Š

.

Select an element.

Touch Speed Boost. The function is set.

Select an element on which SpeedBoost is set.

Touch Speed Boost. The function is deactivated.

Note:  In certain circumstances, the function may be 

deactivated automatically to protect the internal 

electronic components of the cooktop.

You can use the timer function to set a cook time for any 

element. The element will turn off automatically once the 

set time has elapsed. 

9

▯

When using the timer, always keep an eye on the 

cooktop and do not allow anything to boil over or 

burn. Boilovers can cause smoke and foods and 

oils may catch on fire if left on high temperature 

settings.

▯

This function should not be used for long periods 

of time, especially at high heat settings. 

▯

Make sure the cooktop is turned off with the main 

power switch after each use.

Setting the cook time
The cooktop must be turned on.

Select the desired element and power level.

Touch the Timer key. The 

Ú

 indicators light up next to 

the element and min and the timer display 

‹‹ 

is 

shown in the timer display.

Touch the + or - key in the timer display. The basic 

settings are displayed:
+ key = 30 minutes
- key = 10 minutes

Touch the + or - key to set the desired time.

After a few seconds the timer will start to count down.

Once the cook time has elapsed
The element turnes off once the set cook time has 

elapsed. You will hear a beep. The indicator 

‹

 appears in 

the element display and the timer display shows 

‹‹

 for 

10 seconds. The 

Ú

 indicator next to the element stays 

on. Once you touch the Timer key, the indicators and the 

beep are turned off. 

Changing or cancelling cook time
Touch the Timer key until the 

Ú 

indicator lights up next to 

the desired element. Adjust the cooking time using the 

@ 

or 

A 

 keys. To cancel cook time set the timer to 

‹‹

 with 

the 

A 

 key.

Automatic timer
With this function you may select a cook time for all 

elements. Once an element is turned on, the selected 

time will begin to count down. The element will 

automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in 

the chapter "Basic settings".
Note:  The cook time can be changed or cancelled for 

any element:
Touch the Timer key several times until the

 Ú

 indicator of 

the desired element lights up. Adjust the cook time with 

the 

@

 or 

A

 key, or deactivate it by setting the the timer 

value to 

‹‹

.

*URXS









*URXS