Bosch NIT5066UC マニュアル

17

This appliance requires no maintenance other than daily 

cleaning. For best results, apply cooktop cleaning cream 

daily.

Malfunctions are usually due to small details. Before 

calling the Technical Assistance Service, you should 

consider the following advice and warnings.

9

Repairs should only be done by a trained servicer.
Improper repair of your appliance may result in risk 

of severe physical injury or death.

Pans with aluminum, copper or stainless steel bases may 

leave marks. Treat immediately after surface has cooled 

with glass ceramic cooktop cleaner. If this does not 

remove the marks, try a mild abrasive (Bon Ami®, Soft 

Scrub® without bleach) with a damp paper towel. Rinse 

and reapply glass ceramic cooktop cleaner. Failure to 

remove metal marks before the next heating makes 

removal very difficult.

Hard water spots:
Hot cooking liquids dripped on surface

Minerals in some water can be transferred onto the sur-

face and cause stains. Use undiluted white vinegar, rinse 

and dry. Recondition with glass ceramic cooktop cleaner. 

Remove boilovers and stains before using the cooktop 

again.

Surface scratches:
Small scratches are common and do not affect cooking. 

They become smoother and less noticeable with daily use 

of the glass ceramic cooktop cleaner. 

Apply glass ceramic cooktop cleaner before using to 

remove sand-like grains and grit such as salt and sea-

soning. Scratches can be reduced by using pans with 

bases that are smooth, clean, and dry before use. Use 

recommended glass ceramic cooktop cleaner daily.
NOTICE: Diamond rings may scratch the surface.

none

The electric power supply has been cut 

off. 

Use other electrical appliances to check whether 

there has been a power cut. 

The appliance has not been correctly 

connected following the connection dia-

gram.

Check that the appliance has been connected 

correctly according to the connection diagram.

Electronic system malfunction.

If the measures above cannot resolve the mal-

function, contact the Technical Assistance Ser-

vice.

The indicators flash

The control panel is damp or an object is 

resting on it.

Dry the control panel area or remove the object.

The indicator - flashes 

on the cooking zone 

indicators

A fault has occurred in the electronic 

system.

Briefly cover the control panel with your hand to 

confirm the malfunction.

Ҥ

 + number / 

š

 + 

number / 

¡

 + number

Electronic system malfunction.

Unplug the cooktop from the mains. Wait about 

30 seconds before plugging it in again.*

”‹

 / 

”Š

There is an internal operating error.

Unplug the cooktop from the mains. Wait about 

30 seconds before plugging it in again.*

* If the warning persists call the Technical Assistance Service.
Do not rest hot pans on the control panel.