Frigidaire FGEC3645PS オーナーマニュアル

ページ / 12
5
BeFore setting surFace controls
about the ceramic glass cooktop
The ceramic cooktop has radiant surface elements 
located below the surface of the glass. The design of 
the ceramic cooktop outlines the area of the surface 
element underneath. make sure the diameter of the 
pan matches the diameter of the element outline on the 
cooktop (See Figs. 1 to 4).
Heat is transferred up through the surface of the cooktop 
to the cookware. Only flat-bottom cookware should 
be used. The type and size of cookware, the number 
of surface elements in use and their settings are all 
factors that will affect the amount of heat that will 
spread to areas beyond the surface elements. The areas 
surrounding the elements may become hot enough to 
cause burns.
locations of the surface radiant 
elements
Your cooktop is equipped with radiant surface radiant 
elements with different wattage ratings. The ability to 
heat food quicker and in larger volumes increases as the 
element wattage increases.
The radiant surface elements are located on the 30” 
cooktop as follows:
model a 
•  One 12 inch radiant element located at the left front 
position.
•  One 7 inch radiant element located at the right rear position.
•  One 6 inch radiant element located at the left rear 
position.
•  One dual 6 or 9 inch radiant element located at the 
right front position.
note
Please read detailed instructions for ceramic glass 
cooktop cleaning in the general care & cleaning 
section and Before You call checklist section of this 
Use and Care Guide.
Fig. 1 - 30” Model
Cooktop Appearance
Fig. 2 - 36” Model
Cooktop Appearance
Fig. 3 - 30” Model
Cooktop Appearance
model a
model B
Fig. 4 - 36” Model
Cooktop Appearance
about the radiant surface elements
The element temperature rises gradually and evenly. 
As the temperature rises, the element will glow red. To 
maintain the selected setting, the element will cycle ON 
and OFF. The heating element retains enough heat to 
provide a uniform and consistent heat during the OFF 
cycle. For efficient cooking, turn OFF the element several 
minutes before cooking is complete. This will allow 
residual heat to complete the cooking process.
model B 
•  One dual 9 or 12 inch radiant element located at the 
left front position.
•  One 7 inch radiant element located at the right rear position.
•  One 6 inch radiant element located at the left rear 
position.
•  One dual 6 or 9 inch radiant element located at the 
right front position.