Capital MWD30ES インストール手順

- 8 - 

1.  Move the Warming Drawer as close to the point of installation as possible prior to removing packing 

materials to prevent damage. 

2.  Remove all packing materials from inside the Warming Drawer and any protective plastic on the outside 

of the Warming Drawer. 

3.  Read and retain all instructions before installation and use and after installation as a reference. 

4.  The units are heavy. Plan sufficient manpower and use caution when lifting the unit. 

 

1.  All wiring must comply with all local ordinances and building codes. 
2.  Electrical services at the installation must meet or exceed those specified for the appliance. Do not 

proceed with the installation until the specifications are met. Call a licensed electrician, if required, to 
meet the necessary requirements.  

3.  To prevent electric shock or fire hazard, turn off power at the circuit breaker or fuse box prior to 

connecting the Warming Drawer. 

4.  Improper connection of the electrical wiring can cause an electric shock hazard and damage the 

appliance. Capital Cooking Equipment is not responsible for damages resulting from improper installation. 

5.  The Warming Drawer must be plugged into a grounded outlet. 
6.  Do not use an extension cord with this appliance. Fire, electric shock or other personal injury or damage 

may occur as a result. 

7.  Do not install a fuse in the neutral or ground circuit. A fuse in the neutral or ground circuit may result in an 

electric shock hazard. 

IMPORTANT:  Prior to installation and preparation of the wiring, power to the planned Warming Drawer electrical 

circuit must be turned off at the breaker or fuse box. 

WARNING: 

•  Ground sources must be approved by local codes. 

 

MWD301ES 

Warming Drawer 

120 VAC 

60 Hz, Single Phase 

0.54 Kw, 4.37 Amp 

15 Amp (Dedicated) 

3 Prong Plug