Viking G6MD インストール手順

OUTSIDE AIR

TO CENTRAL SYSTEM

RETURN AIR OR INTERIOR

WALL REGISTER 

DAMPER FLAP (Install in

vertical position shown.)

AIR FLOW

AIR FLOW

SET SCREW

-

cal position when closed and power is off. The set screw can be 

used to adjust the damper opening - thereby balancing the inside 

and outside air pressure when the range hood exhausts at high 

speed.

The pressure switch is designed to operate when the static 

pressure increases to 0.05” Ps or more. It may not operate at low 

speeds since the pressure is below this limit.

together with one pressure switch and one transformer - for up 

to three dampers.

For the probe & pressure switch to work effectively the roof or 

wall cap must have a spring loaded damper.