Electrolux EW36IC60L 仕様ガイド
Induction Cooktops
EW36IC60L S, EW36IC60L B
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-877-4electrolux (1-877-435-3287)
•
electroluxappliances.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
electroluxappliances.ca
EW36IC60L 06/12
© 2012 Electrolux Home Products, Inc.
36" Induction Cooktop Specifications
•
Product Weight – 60 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz,
fused on both sides of line with ground.
fused on both sides of line with ground.
•
Connected Load (kW Rating) @ 240 / 208 Volts = 12.0 / 10.4 kW
•
Amps @ 240 / 208 Volts = 50.0 / 50.0 Amps
•
Recommended Circuit Breaker – 40 Amps
•
Always consult local and national electric codes.
•
Allow 2" space beneath cooktop or optional platform to clear electrical
cable and allow space for installation of junction box on wall at back of
cooktop. Position center of junction box 10" inward from right side of
cooktop cutout, and 12" down from underside of countertop.
cable and allow space for installation of junction box on wall at back of
cooktop. Position center of junction box 10" inward from right side of
cooktop cutout, and 12" down from underside of countertop.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Allow 30" minimum clearance between top of cooktop and bottom of
unprotected wood or metal overhead cabinetry.
unprotected wood or metal overhead cabinetry.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than 36-3/4".
installed to either side of appliance must be no less than 36-3/4".
•
Allow 24" minimum clearance when bottom of wood or metal overhead
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No. 28 MSG sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No. 28 MSG sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
•
Allow 2" minimum clearance between rear edge of cutout and nearest
combustible surface above countertop.
combustible surface above countertop.
•
Allow 2" minimum clearance from edge of cooktop to nearest
combustible wall on either side of unit.
combustible wall on either side of unit.
•
Do NOT apply sealant, or obstruct any fresh air intakes or air exhaust
vents located along cooktop’s perimeter, to allow for necessary air
circulation.
vents located along cooktop’s perimeter, to allow for necessary air
circulation.
•
To reduce risk of fire when using overhead cabinetry, install range hood
that projects horizontally a recommended minimum of 5" beyond
bottom of cabinets.
that projects horizontally a recommended minimum of 5" beyond
bottom of cabinets.
•
Induction Cooktop model EW36IC60L is approved to be used over any
Electrolux Electric Single Wall Oven. (Refer to Electric Cooktop Installation
Over 30" / 27" Electric Single Wall Oven Specifications page on web.)
Electrolux Electric Single Wall Oven. (Refer to Electric Cooktop Installation
Over 30" / 27" Electric Single Wall Oven Specifications page on web.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
Optional Accessories
•
Granite Countertop Installation Kit – (PN # 903061-9010).