Zephyr AK9128AS オーナーマニュアル

ページ / 45
ZRC-9100A Recirculating Kit Instructions
(2) charcoal filter
(8) C clips
(1) 7" to 6" 
adapter
top of cabinet
FEB15.0101
1. Remove mesh filter from hood and place
    charcoal on the top of mesh filter. Secure
    charcoal filter by 4 C clips from recirculation
    kit, 2 C clips for each enlongated side of
    charcoal filter, FIG.1.
2. Reinstall mesh filter.
3. Charcoal filter must be replaced after every
    120 hours of use or approximately every
    3 to 4 months based on an average daily
    use of 1 hour of cooking time.
4. Install 7" to 6" adapter on the top of hood, 
    FIG. 2.
FIG. 1                                                       FIG.2
FIG. 3
FIG.3
FIG. 4
FIG.4
FIG.5
FIG. 5
screw (1 in each corner 
of return air vent)
4. Install 7" to 6" adapter to the return air vent 
and use tape to secure. FIG.2.
1. Cut a 6 1/2" round opening in top or the
    cabinet where the ducting will connect to the
    return air vent and 7" to 6" adapter. FIG.3. 
2. Connect 7" round ducting from blower collar to
    return air vent collar. Return air vent collar will
    go around the ducting. Secure with duct tape.
3. Secure return air vent to top of cabinet with (4)
    screws.
1. Cut a 6 1/2" round opening in soffit ceiling
    where the ducting will connect to the return 
    air vent and 7" to 6" adapter. FIG.4. 
2. Connect 7" round ducting from blower collar to
    return air vent collar. Return air vent collar will
    go around the ducting. Secure with duct tape.
3. Secure return air vent to soffit or ceiling with (4)
    screws.
1. Remove mesh filter from hood and place 
    charcoal on the top of mesh filter. Secure
    charcoal filter by 4 C clips from recirculation
    kit, 2 C clips for each enlongated side of 
    charcoal filter, FIG.1.
2. Reinstall mesh filter.
3. Charcoal filtere must be replaced after every
    120 hours of use or approximately every
    3 to 4 months based on an average daily
    use of 1 hour of cooking time.
4. Install 7" to 6" adapter to the return air vent
    and use tape to secure. FIG.2.