Gaggenau AL400721 マニュアル

9

Risk of damage due to corrosion. Always turn 
appliance on when cooking to avoid 
condensation buildup. Condensation can lead 
to corrosion damages.

Risk of damage due to ingress of humidity into the 
electronic circuitry. Never clean operator controls with 
a wet cloth.

Surface damage due to incorrect cleaning. Clean 
stainless steel surfaces in the grind direction only. Do 
not use any stainless steel cleaners for operator 
controls.

Surface damage due to strong or abrasive cleaning 
agents. Never use strong and abrasive cleaning 
agents.

Objects set down on the appliance can damage the 
appliance and adjacent stove top. Do not set any 
objects on the moving parts of the appliance.

Unpack the appliance and dispose of the packaging in 
line with environmental requirements.

You can use this appliance in the air extraction or the 
recirculation mode.

Note: The extracted air must neither be discharged 
into an operating smoke or waste gas chimney nor into 
a shaft that serves to ventilate rooms where heat-
producing appliances are installed.

▯

The local chimney sweep's consent must be 
obtained if the exhaust air is to be routed to a 
smoke or waste gas chimney that is not in 
operation.

▯

A telescopic wall duct should be used if the 
exhaust air is routed through the outside wall.

Note: You must install an activated charcoal filter to 
bind odors in the recirculation mode. Refer to the 
manual or ask your specialist dealer for details of the 
various options for operating the appliance in the 
recirculation mode. You can obtain the necessary 
accessories from specialist dealers, from our after-
sales service or in the online shop.

The air sucked in is cleaned by the 
grease filters and is routed outdoors 
through a pipe system.

The aspirated air is cleaned by the grease 
filters and an activated charcoal filter and 
is returned to the kitchen.