Thermador T18ID800RP インストール手順
33
4.
Slide cover strips in the gap between the door
panel (a) and glass pane (b).
panel (a) and glass pane (b).
Adjusting the door opening angle
Depending on the installation situation, it may be
necessary to adjust the door opening angle. A door
opening angle of 115° has been set at the factory.
necessary to adjust the door opening angle. A door
opening angle of 115° has been set at the factory.
To adjust the door opening angle to 90°:
1.
Open door to 90°.
2.
Insert the banking pin through the boreholes which
are now vertically aligned and drive in with
a hammer.
are now vertically aligned and drive in with
a hammer.