Smeg S2951TCU 使用とお手入れ

MAKE SURE THAT YOUR PRO RANGE IS CORRECTLY SECURED AND THE ANTI-TIP DEVICE IS
CORRECTLY INSTALLED. REFER TO THE INSTALLATION MANUAL.

-  Remove all packaging materials and temporary labels from the cooktop.

-  Record the Model and Serial number on Page 2 of this booklet. The Model and Serial numbers are

on the Pro Range I.D. plate, which is visibly positioned in the storage compartment. THE I.D. PLATE
MUST NOT BE REMOVED.

-  The cooktop must be cleaned before cooking for the first time. To do this, put a pan of water on the

front hotplates and turn them to high on for at least 30 minutes. After 30 minutes turn off the front
hotplates and turn the rear hotplates and the central hotplate, if present, to high. This is necessary in
order to get rid of the "new smell" and to evaporate the humidity that may have collected during the
manufacturing process. It must also be done to check that the electronic circuits and the control
buttons work properly. If the controls do not work properly after 30 minutes, it means that not all the
humidity has evaporated: leave the hotplates on until all the humidity has evaporated and then turn
off the cooktop. Remove all the removable labels and any protective sheeting. To turn on the
cooktop, follow the instructions provided in point "6.11 Turning off".