Zephyr CCAE48ASX マニュアル

www.zephyronline.com

1. Attach capacitor box to inside of hood using two 

M4*10 screws included with internal blower.

2. Attach green ground wire to ground screw on 

hood.

3. Connect 6 pin male connector from capacitor 

box to 6 pin female connector on control board 
box.

4. Place solid mounting plate on top of hood and 

secure using eight M4*8 screws.

5. Remove rectangular cap from back of hood.

Place six M4*8 screws aside for later use.

6. Attach blower brackets to blower as shown above 

using two M3.5*10 screws for each bracket.
There are two brackets total, one for each side of 
WKHEORZHU127('ULOOHGÀDQJHRIERWKEORZHU
brackets faces away from the blower casing.