Electrolux EWMGD70J 使用とお手入れ

TEMPERATURE

EXTENDED TUMBLE

OPTIONS SCROLL & SELECT

DRYING TIME or
DRYNESS LEVEL

To provide the best care of your laundry, not 
every setting or option is available with every 
cycle. If a setting is not available for the cycle 
selected, it will not be displayed.

As the Cycle Selector knob is turned, the 
cycle and estimated cycle time are displayed 
on the User Interface screen for 5 seconds. 
Press any key to advance the User Interface 
and select settings and options.

Clean the lint fi lter after every load. 

CLEAN 

FILTER

 will be displayed at the end of the cycle 

to remind you to remove lint from the fi lter.

to advance the User Interface to select settings 
and options. See the “Cycle Selection” section 
in this guide for descriptions of each cycle.

•  Adjustments made to a cycle will be remem-

bered and recalled each time that cycle is 
selected in the future.

•  To return to the factory default settings, select 

RESET in set prefs under the options scroll 
buttons.

•  To customize and save up to 3 cycles in non-

custom mode plus 9 more cycles for custom us-
ers, see save as favorite and CUSTOM MODE 
in the User Interface sections of this guide.

•  Close the door and press start to begin the 

cycle. The dryer will not operate with the door 
open. To interrupt the cycle, press pause; 
press start to resume the cycle. Press cancel 
to stop the cycle.

•  To change the cycle once the cycle has begun, 

press cancel, select a new cycle, and restart the 
dryer.

•  To change the temperature, dryness level or 

drying time, extended tumble time or options 
once the cycle has begun, press pause, make 
the new selections and restart dryer.

•  A signal will sound at the end of the cycle, pe-

riodically during extended tumble and wrinkle 
release, when the damp alert option is select-
ed and to notify you that the load has fi nished.

•  When the cycle ends, 

COMPLETE

 will be 

displayed and the drum light will come on. 
Remove the items promptly and hang or fold.

•  If no buttons are pressed, the User Interface 

screen will automatically advance after 5 sec-
onds and display the preset drying temperature, 
dryness level (Auto Dry) or drying time (Time 
Dry), extended tumble time, and options for the 
cycle selected will be displayed. See the “Cycle 
Settings Chart” in this guide for settings avail-
able for each cycle.

•  To change the settings, press the temp, dry-

ness level (Auto Dry) or drying time (Time Dry) 
and extended tumble buttons to scroll to the 
desired settings. Press the “scroll up” or “scroll 
down” buttons under options to scroll through 
the options menu. Press the select button to 
add or delete options. The estimated cycle time 
will be displayed at the top of the screens.