Summit REX245SSRT オーナーマニュアル
![Summit](https://files.manualsbrain.com/attachments/4595b4104c7fa9afd97f50cce9de2cb70cbe780f/common/fit/150/50/6713795c9069b8d69615243bf026a42be787dcf338c28695e911d49078e6/brand_logo.png)
29
Cleaning the glass cooktop.
(on some models)
Normal Daily Use Cleaning
Clean your cooktop after
each spill. Use Ceramic
Cooktop Cleaner.
Burned-On Residue
WARNING: DAMAGE to your glass surface may occur if you use
scrub pads other than those recommended.
Heavy Burned-On Residue
Note: Do not use a dull or
nicked blade.
ONLY use Ceramic Cooktop Cleaner on
the glass cooktop. Other types of cleaners
may not be as effective.
To maintain and protect the surface of
To maintain and protect the surface of
your glass cooktop, follow these steps.
1. Before using the cooktop for the first
time, clean it with Ceramic Cooktop
Cleaner. This helps protect the top and
makes cleanup easier.
2. Daily use of Ceramic Cooktop Cleaner
will help keep the cooktop looking
new.
3. Shake the cleaning cream well. Apply
a few drops of Ceramic Cooktop
Cleaner directly to the cooktop.
4. Use a paper towel for Ceramic Cook-
tops to clean the entire cooktop sur-
face.
5. Use a dry cloth or paper towel to re-
move all cleaning residue. No need to
rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been
cleaned thoroughly.
Safety Instructions
Operating
Instructions
Care and Cleaning
Troubleshooting Tips
Consumer Support
Installation
Instructions
1. Allow the cooktop to cool.
2. Spread a few drops of Ceramic Cook-
2. Spread a few drops of Ceramic Cook-
top Cleaner on the entire burned resi-
due area.
3. Using the included Cleaning Pad for Ce-
ramic Cooktops, rub the residue area,
applying pressure as needed.
4. If any residue remains, repeat the steps
listed above as needed.
5. For additional protection, after all resi-
due has been removed, polish the en-
tire surface with Ceramic Cooktop
Cleaner and paper towel.
Use a Cleaning Pad for Ce-
ramic Cooktops.
1. Allow the cooktop to cool.
2. Use a single-edge razor blade scraper
2. Use a single-edge razor blade scraper
at approximately a 45º angle against
the glass surface and scrape the soil. It
will be necessary to apply pressure to
the razor scraper in order to remove the
residue.
3. After scraping with the razor scraper,
spread a few drops of Ceramic Cook-
top Cleaner on the entire burned resi-
due area. Use the Cleaning Pad to re-
move any remaining residue.
4. For additional protection, after all resi-
due has been removed, polish the en-
tire surface with Ceramic Cooktop
Cleaner and a paper towel.