Maytag MVWC215EW 使用とお手入れ

 Washer not performing as expected (cont.)
Dry spots on load after cycle High speed spins extract more  

moisture than traditional top-load 

washers. 

The high spin speeds combined with air flow during the final  

spin can cause items near the top of the load to develop dry spots 

during the final spin. This is normal.

Incorrect or wrong wash or 

rinse temperatures

Check for proper water supply.

Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached to both washer and faucet, and  

have both hot and cold water flowing to inlet valve.
Check that inlet valve screens are not clogged.
Remove any kinks in hoses.

Energy saving controlled wash 

temperatures.

This washer uses cooler wash and rinse water temperatures  

than your previous washer. This includes cooler hot and warm 

washes.

Load not rinsed

Check for proper water supply.

Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached and have water flowing to the  

inlet valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.

Using too much detergent.

The suds from too much detergent can keep washer from  

operating correctly. Always measure detergent and follow  

detergent directions based on load size and soil level.

Washer not loaded as 

recommended.

The washer is less efficient at rinsing when load is tightly packed.
Load garments in loose heaps evenly around the basket wall. Load 

with dry items only.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 additional garments after washer has started.

Sand, pet hair, lint, etc. on 

load after washing

Heavy sand, pet hair, lint, and 

detergent or bleach residues may 

require additional rinsing.

Add an Extra Rinse to the selected cycle.

Load is tangling

Washer not loaded as 

recommended.

See “Using Your Washer” section.
Select a cycle with a slower wash action and spin speed; however, 

items will be wetter than those using a higher speed spin. See the 

“Cycle Guide” to match your load with the best cycle.
Load garments in loose heaps evenly around the basket wall.
Reduce tangling by mixing types of load items. Use the  

recommended cycle for the type of garments being washed.

Not cleaning or removing 

stains

Washer not loaded as 

recommended.

Washer is less efficient at cleaning when load is tightly packed.
Load garments in loose heaps evenly around the basket wall. 

Load with dry items only.
Add only 1 or 2 additional garments after washer has started.

Adding detergent on top of load.

Add detergent, Oxi products, and color-safe bleach to the bottom of 

the basket before adding the load items.

First try the solutions suggested here or visit our website at www.maytag.com/product_help - 

In Canada www.maytag.ca for assistance and to possibly avoid a service call.