Zephyr ZVEE30CS インストール手順

1.  Measure from range top to hood bottom and mark line A.  

´PLQLPXPIURPUDQJHWRS

2.  Plum and mark center line.

 0DUNPRXQWLQJKHLJKWOLQH%´IURPOLQH$

4.  Mark mounting spread from C/L on line B. From center line 

WROHIWPRXQWPDUN´)URPFHQWHUOLQHWRULJKWPRXQW

PDUN´

 )DVWHQ0[´VFUHZVLQWRVWXGVRQOLQH%'RQRW

fasten screws all the way. Note: wood blocking may need 
to be added behind the drywall if no studs are present.  
Wall anchors may also be used but check local codes 
for compliance. Failure to use suitable wall anchors 
and screws to hold the weight of the hood could result 
in personal injury or damage to cooking surface or 
counter.

 +DQJKRRGRQWRVFUHZVDQGKDQGWLJKWHQ),*$8VH

the last M6 x 1-1/4” screw to further secure the hood to the 
wall from inside the hood.

7.   Center and attach duct cover bracket to wall below ceiling 

RUVRI¿WXVLQJ0[´VFUHZV

8.   Remove tape securing electronics mounting bracket to 

hood. Reposition electronics mounting bracket to hood and 

VHFXUHE\WZRSUHLQVWDOOHGVFUHZVDVVKRZQLQ),*%

9.   Install electrical.

10. *Install duct work and duct tape.

11. Power up hood and check for leaks around duct tape.

12.  Place telescopic duct covers onto hood and extend inner 

WRSGXFWFRYHUXSZDUGVDQGVHFXUHWRGXFWFRYHUEUDFNHW

XVLQJ0[´VFUHZV

      *If using hood in recirculating mode you must secure air 

diverter plate onto wall before installing duct work and duct 
covers.  Turn to page10 for more details.

C/L

10-1/4"

3-9/16"

C/L

26" min

1

Duct Cover Bracket

4-3/4"

Cable Lock

1

$FDEOHORFNLQJFRQQHFWRUQRWVXSSOLHGPLJKW
be required by local codes.  Check with local 
requirements and codes, purchase and install 
appropriate connector if necessary.