Frigidaire FGHT1846QE オーナーマニュアル

7

When reversing the door swing:
You MUST move the anti-tip bracket to align 

with the hinges of the door and install the 

toe grille support for proper blance. Failure 

to do so will result in injury.

Washer

Hinge

Pin

Bottom

Hinge

Screws

Toe

Grille

Door Stop

Screw

Door

Stop

A

Toe Grille Cover

Toe

Grille

Support

Anti-tip

Bracket

B

Toe Grille

Cover

Toe Grille

Support

Anti-tip

Bracket

  7.  Remove three screws on bottom hinge 

and anti-tip bracket (if equipped) with ⅜”

socket wrench.

 8.  Install bottom hinge and anti-tip bracket 

(if equipped) on opposite side with the

three screws removed from step 7.

 9.  Unscrew bottom hinge pin using 

adjustable wrench. Move hinge pin to 

other hole in hinge and tighten with 

adjustable wrench.

 10.  Reverse door handles (see Handle 

Installation section).

 11.  Move freezer and refrigerator door stops 

to opposite side. Before starting screws, 

use an awl to puncture the foam.

 12.  Position refrigerator door onto bottom 

hinge pin and screw center hinge pin 

through center hinge into top of door. Close 

refrigerator door to help align hinge hole.

 13.  Tighten center hinge pin with adjustable 

wrench.

 14.  Remove cabinet and hinge hole plugs and 

move to opposite side.

 15.  Lower freezer door onto center hinge pin.
 16.  Close freezer door. Have an assistant 

lift up on opposite side of door while 

tightening screws to install top hinge.

 17.  There are two toe grille covers provided 

in your literature packet; one for the right 

side and one for the left side. Install the 

appropriate cover over the opening on the 

side opposite the anti-tip bracket, (see 

Figures A & B). 

Lower



In case of future door reversals, save the 

toe grille cover not being used.

 18.  Flip toe grille and reinstall (some models).
 19.  Plug in electrical power cord and turn 

refrigerator temperature control to center 

position. Adjust setting as necessary.