Zephyr AHZM90ABX ユーザーズマニュアル

REPLACING THE LIGHT BULB:

WARNING

Disconnect the hood from electricity and be sure the lights are cool.
If new lights do not operate, make sure the light bulb is inserted correctly before calling service.

For bulb type GU4/MR11 12V 20W; hood models ALA, ALL, APN, ASU and ASL
For bulb type GU5/MR16 12V 20W; hood models AHZ and ATI

- Pull down on bulb to remove.

- Check proper orientation of bulb to socket before inserting new bulb. Push upwards until bulb
engages into socket and spring clamps. Replacement bulb must have a safety heat fused lens
“suitable for use in open luminaries”.

- Reinstall the light cover.

For bulb type G4 12V 20W; hood models ADU, ADL, and AED

light bulb

Using a small flat head screwdriver or equivalent tool, carefully pry loose the light bulb to
disconnect it from the spring clamps in the socket. Take care not to scratch the bottom of the
hood.

Using a small flat head screwdriver or equivalent tool, carefully pry loose the light cover. Take
care not to scratch the bottom of the hood.

Remove the defective light bulb and replace with a new light bulb, “suitable for use in open
luminaries”.

Follow package directions and do not touch new light bulb with bare hands.

- 14 -

Maintenance