OceanAire OWC1211 操作ガイド
STANDARD FEATURES
SERVICEABILITY
All AquaCooler Series units are designed with removable panels to provide full service accessibility.
Turn to page 11 “Part Replacement Procedure” for removal of the correct panel when replacing a part.
AUTOMATIC WATER VALVE
All units are equipped with a direct-acting, refrigeration system head pressure actuated water regulating
valve. This valve, factory set for 94° - 100° leaving water temperature (LWT), flows only the amount of
water required to achieve the desired refrigeration system operating pressure. Units used for closed loop
operation may be ordered without the water valve. If, however, the temperature of the return water is
questionable in a closed loop, the water valve may be helpful and left in the system with little pressure
drop.
ATTRACTIVE CABINET
The AquaCooler Series cabinet is constructed of 18 gauge galvanized steel with a platinum texture poly-
ester powder coated finish that will compliment any decor. The entire cabinet is insulated with a sound
absorbent insulation for cool, quiet comfort. The base pan is 14 gauge galvanized steel and remains dry
and free from odor and fungal growth.
HIGH PRESSURE SAFETY SWITCH
All units incorporate a manual re-set high pressure switch for maximum protection of the refrigeration
system and compressor. The cut-out pressure setting is 375 ± 5 PSIG for all models except OWC36
which uses 425± 5 PSIG. If the pressure exceeds this setting, the compressor stops and can be re-started
by depressing the “RESET” button located on the back panel of the unit. The high pressure control’s cap-
illary line is attached to a schrader valve. This allows replacement of a defective control without recover-
ing the refrigerant.
All AquaCooler Series units are designed with removable panels to provide full service accessibility.
Turn to page 11 “Part Replacement Procedure” for removal of the correct panel when replacing a part.
AUTOMATIC WATER VALVE
All units are equipped with a direct-acting, refrigeration system head pressure actuated water regulating
valve. This valve, factory set for 94° - 100° leaving water temperature (LWT), flows only the amount of
water required to achieve the desired refrigeration system operating pressure. Units used for closed loop
operation may be ordered without the water valve. If, however, the temperature of the return water is
questionable in a closed loop, the water valve may be helpful and left in the system with little pressure
drop.
ATTRACTIVE CABINET
The AquaCooler Series cabinet is constructed of 18 gauge galvanized steel with a platinum texture poly-
ester powder coated finish that will compliment any decor. The entire cabinet is insulated with a sound
absorbent insulation for cool, quiet comfort. The base pan is 14 gauge galvanized steel and remains dry
and free from odor and fungal growth.
HIGH PRESSURE SAFETY SWITCH
All units incorporate a manual re-set high pressure switch for maximum protection of the refrigeration
system and compressor. The cut-out pressure setting is 375 ± 5 PSIG for all models except OWC36
which uses 425± 5 PSIG. If the pressure exceeds this setting, the compressor stops and can be re-started
by depressing the “RESET” button located on the back panel of the unit. The high pressure control’s cap-
illary line is attached to a schrader valve. This allows replacement of a defective control without recover-
ing the refrigerant.
4
High Pressure Switch Re-
set Button
Water Cooled Condenser
Power Cord
Caster
set Button
Water Cooled Condenser
Power Cord
Caster
Compressor
Electrical Box
Control Board
Electrical Box
Control Board