Electrolux EI23BC35KS オーナーマニュアル

ページ / 38
6
Installation
This Use & Care Guide provides general installation and 
operating instructions for your model.  We recommend 
using a service or kitchen contracting professional to 
install your refrigerator.  Use the refrigerator only as 
instructed in this Use & Care Guide.  
Before starting 
the refrigerator, follow these important first steps.
Location
 •  Choose a place that is near a grounded, non-
GFCI, electrical outlet. 
Do Not use an extension 
cord or an adapter plug.
 •  If possible, place the refrigerator out of direct
sunlight and away from the range, dishwasher, or 
other heat sources.
 •  The refrigerator must be installed on a floor that is
level and strong enough to support a fully loaded 
refrigerator.
 •  Consider water supply availability for models
equipped with an automatic ice maker.
Installation
 •  Allow the following clearances for ease of
installation, proper air circulation, and plumbing 
and electrical connections:
 
Sides & Top 
³⁄₈
 inch (9.5 mm)
 
Back   
1 inch (25.4 mm)
Door opening
Your refrigerator should be positioned to allow easy 
access to a counter when removing food. For best use of 
refrigerator drawers and freezer baskets, the refrigerator 
should be in a position where both can be fully opened.
CAUTION
DO NOT install the refrigerator where the 
temperature will drop below 55°F (13°C) or rise above 
110°F (43°C).  The compressor will not be able to 
maintain proper temperatures inside the refrigerator.
DO NOT block the toe grille on the lower front of your 
refrigerator. Sufficient air circulation is essential for 
the proper operation of your refrigerator.
NOTE
If your refrigerator is placed with the door hinge against 
a wall, you may have to allow additional space so the 
door can be opened wider.
NOTE
The refrigerator doors are designed to shut by 
themselves within a 20-degree opening.
Required Tools
You will need the following tools: