Electrolux EI23BC35K オーナーマニュアル

 

1  Remove handles from 

protective packaging.

 

2  Position fresh food handle 

end caps (A) over upper and 
lower pre-installed shoulder 
bolts (B) that are fastened 
into door, ensuring the holes 
for the set screws are facing 
towards the opposite door.  

 

3  While holding handle firmly 

against door, fasten upper 
and lower Allen set screws (C) 
with supplied Allen wrench.

 

4  Repeat steps 2 and 3 to 

install opposite handle. 
Ensure the holes for the set 
screws are facing towards the 
first door. 

 

5  Position freezer handle end 

caps over left and right pre-
installed shoulder bolts that 
are fastened to the drawer, 
ensuring the holes for the set 
screws are facing down.

 

6  While holding handle firmly 

against drawer, fasten left and 
right Allen set screws (C) with 
supplied Allen wrench.

To ensure that handles are flush with doors/drawer, make sure that set screws are completely tightened.