Frigidaire FGHF2366PF 使用とお手入れ

10

To remove the refrigerator doors:
  1  Trace lightly around the door’s top hinges 

with a pencil. This makes reinstallation easier.

  2  Disconnect the harness by grasping both 

sides of the connector firmly, depress the

latch, and pull apart. Remove the two screws 

from the top hinge. Lift the door off of the 

bottom hinge and set it aside.

  3  Detach the water tube from the connector 

located behind the refrigerator and pull the 

tube back out to the front of the unit. The 

connector releases when you press inward 

on the outer sleeve while pushing the tube 

toward the connector then while continuing to 

hold in the sleeve, pull the tube away.

If your refrigerator will not fit through an entrance

area, you can remove the doors. Check first by

measuring the entrance.
To prepare for removing the doors:
  1  Make sure the electrical power cord is 

unplugged from the wall outlet.

  2  Open the freezer drawer and remove the toe 

grille (see “Installation” section).

  3  Remove any food from the door shelves and 

close the doors.

To remove the top hinge covers:
  1  Remove the two screws from each cover over 

the top door hinges.

  2  Lift inside edge of hinge cover and tilt back.

Rear

Cover

Screw

Ground

Screw

Top

Hinge

Top Hinge

Cover

Hinge

Screws

Multi-wire

Cables

Leave

Hinge

With

Door

Front

Cover Screw

Water

Line

Rear

Cover

Screw

Front

Cover Screw

Top Hinge

Cover

Hinge

Screws

Two Wire

Cables

Leave

Hinge

With

Door

Top

Hinge

Ground

Screw



DO NOT remove the ground screw from hinge.



Use care while pulling the water tube from the 

unit to be sure that you do not kink the tube.