Amana AQC0701DRW 使用とお手入れ

Before you move your freezer into its final location, it is important 
to make sure you have the proper electrical connection.

A 115 Volt, 60 Hz, AC only, 15-amp fused and grounded (earthed) 
electrical supply is required.
It is recommended that a separate circuit serving only your freezer 
be provided. Use an outlet that cannot be turned off by a switch. 
Do not use an extension cord.
NOTE: Before performing any type of installation or cleaning, turn 
the Temperature Control to the OFF position as shown and then 
disconnect the freezer from the electrical source. 

Turn the freezer temperature control to 3. This setting is designed 
to maintain the temperature at or near 0°F (-17.8°C) under normal 
operating conditions.
IMPORTANT: Allow the freezer to cool 6 to 8 hours before filling 
with frozen food. Let the freezer cool overnight before adding 
large amounts of unfrozen food. Do not add more than 2 to 3 lbs 
(0.907 to 1.360 kg) of unfrozen food per cubic foot of freezer 
space. 

NOTES: 

■

When the freezer is first started, the compressor will run 
constantly until the interior is cooled. It may take 6 to 8 hours 
(or longer), depending on location, room temperature and the 
number of times the freezer lid is opened.

■

After the cabinet is cooled, the compressor will turn on and off 
as needed to keep the freezer at the proper temperature.

■

Each time the lid is opened, cold air escapes and the 
temperature inside the freezer rises.

■

The outside of your freezer may feel warm. This is normal. The 
freezer’s design and main function is to remove heat from the 
contents and air inside the freezer. The heat is transferred to 
the room air, making the outside of the freezer feel warm. 

■

Turn control to a higher number for colder temperatures.

■

Turn control to a lower number for less cold temperatures.