Amana ART104TFD マニュアル

1. Remove door hinge hole plug from freezer door. Move to 

opposite side hinge hole as shown. See Graphic 3. 

2. Remove door stop. Move to opposite side of refrigerator door 

as shown. See Graphic 4. 

3. Set aside door until hinges and refrigerator compartment door 

are in place.

1. Remove door hinge hole plug from refrigerator door. Move to 

opposite side hinge hole as shown. See Graphic 3.

2. Remove door stop. Move to opposite side of refrigerator door 

as shown. See Graphic 4. 

3. Set aside refrigerator door until bottom hinge is installed on 

refrigerator.

NOTE: Graphic may be reversed if door swing is reversed.
1. Replace the parts for the bottom hinge as shown. Tighten 

screws. Replace the refrigerator door.
NOTE: Provide additional support for the doors while the 
hinges are being moved. Do not depend on the door magnets 
to hold the doors in place while you are working.

2. Assemble the parts for the center hinge as shown and tighten 

all screws. See Center Hinge graphic. Replace the freezer 
door.

3. Assemble the parts for the top hinge as shown. See Top Hinge 

graphic. Do not tighten screws completely. 

4. Line up the doors so that the bottom of the freezer door aligns 

evenly with the top of the refrigerator door. Tighten all screws.

1. Check all holes to make sure that hole plugs and screws are in 

place. Reinstall top hinge cover. See Top Hinge graphic.

2. Plug into a grounded 3 prong outlet.
3. Reset the controls. See “Using the Control(s).”
4. Return all removable door parts to doors and the food to the 

refrigerator.