Frigidaire FFTR18G2QW オーナーマニュアル

14

Adjusting the refrigerator/freezer temperature 

control to “0” turns off the compressor and 

prevents the refrigerator from cooling, but 

does not disconnect the power to the light 

bulb and other electrical components. To 

turn off power to your refrigerator, you must 

unplug the power cord from the wall outlet.



When first turning refrigerator on, adjust control

to Normal. This is the recommended initial setting. 

After 24 hours, adjust the controls as needed.

Normal

Cold

Colder

0



It may take up to 10 minutes for the 

compressor to start when first turned on or

after power interruption.



When first turning refrigerator on, adjust

the refrigerator control to Normal. This is the 

recommended initial setting. After 24 hours, 

adjust the controls as needed.

To ensure safe food storage, allow the 

refrigerator to operate with the doors closed 

for at least 8 hours before loading it with food.



If your unit is in a garage or area where the 

temperature is below 55°, adjust the freezer 

control to the coldest setting to improve 

performance.

•  Adjust temperature gradually: adjust the 

knob in small increments, allowing the 

temperature to stabilize.

•  For colder temperatures, adjust the knob 

towards Colder.

•  For warmer temperatures, adjust the knob 

towards Cold.

Adjusting the refrigerator/freezer control will 

change temperatures in both compartments. The 

auxiliary freezer control can be left at the factory 

pre-set (Normal) or adjusted as desired; it has no 

effect on electrical power to the refrigerator.
To maintain temperatures, a fan circulates air 

in the refrigerator and freezer compartments. 

For good circulation, do not block cold air vents 

with food items.

To ensure safe food storage, allow the 

refrigerator to operate with the doors closed 

for at least 8 hours before loading it with food.