Frigidaire FFRU17G8QW オーナーマニュアル

6



Your appliance may have some, or all of the 

features listed below. Become familiar with 

these features, and their use and care.

The temperature 

control is located 

inside the unit. The 

temperature is factory 

preset to provide 

satisfactory food 

storage temperatures. 

However, the 

temperature control 

is adjustable to 

provide a range of temperatures for your 

personal satisfaction. If a colder temperature 

is desired, turn the temperature control knob 

toward COLDEST, and allow several hours for 

temperatures to stabalize between adjustments.

This shelf is located inside on the door and provides 

additional storage space. To access an item, tilt top 

of “basket” shelf down.

For safe food storage, allow 4 hours for the unit 

to cool down completely. The appliance will run 
continuously for the first several hours. 

1.  Gently lay appliance on its back, on a rug  

or blanket.

2.  Remove 2 base screws and base panel.
3.  Remove wire from clips on bottom of 

cabinet if required.

4.  Unplug connector, if required, by holding 

the cabinet connector in place, and pulling 

door connector out.

5.  Remove bottom hinge screws.
6.  Remove plastic top hinge cover.
7.  Remove screws from top hinge.
8.  Remove top hinge from cabinet.
9.  Remove door and bottom hinge  

from cabinet.

10. To replace door, reverse the above order 

and securely tighten all screws to prevent 

hinge slippage.

3.  Once the inside surface snaps in place, 

continue the process by rolling the handle 

clip slightly outward and pressing down 

firmly to snap onto the outside surface. If 

installed incorrectly, the handle clip will not 

lay flat.