Electrolux EI24ID30QW 使用とお手入れ

ページ / 60
4
Feature Overview
H o w   y o u r   d i s h w a s h e r   c l e a n s
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against 
soiled surfaces.  First, the dishwasher drains for a few seconds to remove soils dropped while loading, 
then fills with water covering the filter area.  Water is then pumped through the spray arms.  Soil particles 
go through and across the filter and down the drain as the water is pumped out.  This series of steps are 
repeated as needed.  The number of water fills varies with the cycle being used.
G e t t i n g   S t a r t e d
To run your dishwasher, follow these basic steps:
1.  Load Dishwasher (See Preparing and Loading Dishes).
2.  Add detergent (See Dishwasher Dispenser & Detergents).
3.  Add Rinse Aid, if needed (See Rinse Aid).
4.  Select desired CYCLE (See Cycle Chart).
5.  Select desired OPTION (See Energy Options).
6.  Run hot water faucet nearest dishwasher until water is hot.  Turn water off.
7.  To start, press START pad and close door.
Upper Spray Arm
Flex Wash
Silverware Basket
Filters
Serial Label 
(located on right 
side of door)
Tub Gasket
Cup Shelves
Middle Spray 
Arm
Bottom Rack
Lower Spray 
Arm
Detergent 
Dispenser 
Rinse Aid 
Dispenser
Upper Rack