Frigidaire FGVU21F8QF オーナーマニュアル

6



Your appliance may have some, or all of the 

features listed below. Become familiar with 

these features, and their use and care.

For safe food storage, allow 4 hours for the unit 

to cool down completely. The appliance will run 

continuously for the first several hours. Foods that 

are already frozen may be placed in the freezer 

after the first few hours of operation. Unfrozen 

foods should NOT be loaded into the freezer until 

freezer has operated for four (4) hours.
When loading freezer, freeze only three (3) 

pounds of fresh food per cubic foot of freezer 

space at one time. Distribute packages to be 

frozen evenly throughout the freezer. It is not 

necessary to turn the control knob to a colder 

setting while freezing food.

1.  Gently lay appliance on its back, on a rug  

or blanket.

2.  Remove two base screws and base panel. 
3.  Remove wire from clips on bottom of 

cabinet if required. 

4.  Unplug connector, if required, by holding 

the cabinet connector in place, and pulling 

door connector out.

5.  Remove bottom hinge screws.
6.  Remove plastic top hinge cover.
7.  Remove screws from top hinge.
8.  Remove top hinge from cabinet.
9.  Remove door and bottom hinge from cabinet.
10. To replace door, reverse the above order 

and securely tighten all screws to prevent 

hinge slippage.

3.  Once the inside surface snaps in place, 

continue the process by rolling the handle 

clip slightly outward and pressing down 

firmly to snap onto the outside surface. If 

installed incorrectly, the handle clip will not 

lay flat.

(some models)
The convertible model can operate as either a 

freezer or a refrigerator.  The electromechanical 

temperature control provides this adjustment and 

is located inside the appliance. The temperature 

is factory preset to provide satisfactory food 

storage temperatures.  However, the temperature 

control is adjustable to provide a range of 

temperatures for your personal satisfaction.  
To adjust the temperature setting, turn 

the temperature control knob clockwise or 

counterclockwise.  When the dial indicator is in 

the “fridge” section, the unit is in refrigerator 

mode.  Turning past that section into the 

“freezer” portion, selects the freezer mode.  Allow 

several hours for the temperature to stabilize 

between adjustments.