Frigidaire FFHT1514Q オーナーマニュアル

8

When reversing the door swing:
You MUST move the anti-tip bracket to align with the 

hinges of the door and install the toe grille support for 

proper balance. Failure to do so will result in injury.

Washer

Hinge

Pin

Bottom

Hinge

Screws

Toe

Grille

Door Stop

Screw

Door

Stop

A

Toe Grille Cover

Toe

Grille

Support

Anti-tip

Bracket

B

Toe Grille

Cover

Toe Grille

Support

Anti-tip

Bracket

  7.  Remove three screws on bottom hinge and anti-

tip bracket (if equipped) with ⅜” socket wrench.

 8.  Remove toe grille support and screws (if 

equipped).

 9.  Install bottom hinge and anti-tip bracket (if 

equipped) on opposite side with the three screws

removed from step 7.

 10.  Unscrew bottom hinge pin using adjustable 

wrench. Move hinge pin to other hole in hinge 

and tighten with adjustable wrench.

 11.  Install toe grille support and screws on opposite 

side (if equipped).

 12.  Reverse door handles (see Handle Installation 

section).

 13.  Move freezer and refrigerator door stops to 

opposite side. Before starting screws, use an awl 

to puncture the foam.

 14.  Position refrigerator door onto bottom hinge pin 

and screw center hinge pin through center hinge 

into top of door. Close refrigerator door to help 

align hinge hole.

 15.  Tighten center hinge pin with adjustable wrench.
 16.  Remove cabinet and hinge hole plugs and move 

to opposite side.

 17.  Lower freezer door onto center hinge pin.
 18.  Close freezer door. Have an assistant lift up on 

opposite side of door while tightening screws to 

install top hinge.

 19.  There are two toe grille covers provided in your 

literature packet or already installed on toe grille; 

one for the right side and one for the left side. 

Install the appropriate cover over the opening 

on the side opposite the anti-tip bracket, (see 

Figures A & B). 

Lower



In case of future door reversals, save the toe grille 

cover not being used.

 20.  Reinstall toe grille with appropriate cover (some 

models).

 21.  Plug in electrical power cord and turn refrigerator 

temperature control to center position. Adjust 

setting as necessary.