Frigidaire FFHT1831QS オーナーマニュアル

4



If your refrigerator is placed with the door 

hinge side against a wall, you may have to 

allow additional space so the door can be 

opened wider.

Do Not install the refrigerator where the 

temperature will drop below 55°F (13°C) or 

rise above 110°F (43°C). The compressor 

will not be able to maintain proper 

temperatures inside the refrigerator.
Do Not block the toe grille on the lower front 

of your refrigerator. Sufficient air circulation

is essential for the proper operation of your 

refrigerator.

This Use & Care Guide provides general 

operating instructions for your model. Use the 

refrigerator only as instructed in this Use & 

Care Guide. Before starting the refrigerator, 

follow these important first steps.

•  Choose a place that is near a grounded 

electrical outlet. Do Not use an extension 

cord or an adapter plug.

•  If possible, place the refrigerator out of 

direct sunlight and away from the range, 

dishwasher or other heat sources.

•  The refrigerator must be installed on a floor

that is level and strong enough to support 

a fully loaded refrigerator.

•  Consider water supply availability for 

models equipped with an automatic ice

maker. If you do not hook up water to 

the refrigerator, remember to turn the ice 

maker off.

•  Allow the following clearances for ease 

of installation, proper air circulation, and 

plumbing and electrical connections:

Sides & Top

⅜ inch

 Back 

 1 

inch

•  All four corners of the cabinet must rest 

firmly on the floor.

 2.  Install left toe grille cover onto slot on 

left side of toe grille.

 3.  Attach toe grille to cabinet.

•  The cabinet should be level at the front 

and rear.

•  The sides should tilt ¼-inch (6 mm) from 

front-to-back (to ensure that doors close 

and seal properly).

•  Doors should align with each other and be 

level.

 1. 

Attach toe grille support bracket to 

cabinet using 3 bolts supplied.