Frigidaire FGHS2631PF オーナーマニュアル

19

Auger

NEVER use an ice pick or similar sharp 

instrument to break up the ice. This could 

damage the ice storage bin and dispenser 

mechanism.

When removing or replacing the ice bin, 

DO NOT rotate the auger in the ice bin. If 

the auger is accidentally rotated, you must 

realign the auger by turning it in 90 degree 

turns (see below) until the ice bin fits into

place with the drive mechanism. If the 

auger is not properly aligned when 

replacing the ice bin, the refrigerator will 

only dispense Crushed Ice. The freezer door 

may also not close properly causing warm 

air to leak into the freezer.

Clean the ice maker and ice bin at regular 

intervals, particularly before you take a 

vacation or move.
To clean the ice maker:
  1 Turn Off the ice maker.
  2  Remove the ice bin by lifting up and out.
  3  Empty and carefully clean the ice bin with 

mild detergent. Rinse with clear water. Do 

not use harsh or abrasive cleaners.

  4  Allow the ice bin to dry completely before 

replacing in the freezer.

  5  Remove ice chips and clean the ice bin 

shelf and the freezer door chute.

  6  Replace the ice bin. Turn On the ice maker 

to resume ice production.

•  An extended power failure (one hour or 

longer) causes ice cubes in the ice storage 

bin to melt and freeze together, jamming 

the dispenser mechanism.

•  You do not use the ice dispenser frequently.

Ice cubes will freeze together in the bin, 

jamming the dispenser mechanism.

Remove the ice storage bin and shake to 

loosen the cubes or clean as explained above.