Frigidaire FGHS2631PP オーナーマニュアル

13

(∧ or ∨)

Used to enter and exit the 

options menu and make 

selections.

Toggles the options and run 

modes.

While in the locked state, 

you will not be able to 

change any settings on the 

display nor dispense ice and 

water. The “Control Locked” 

indicator will flash and an

audible warning tone is 

played.

Toggles dispenser light On 

and Off.

Activates a faster rate for 

freezing food. Deactivates 

after 12 hours.

Increases the production 

of ice. Deactivates after 12 

hours.

Toggles the temperature 

displays On and Off.

Allows the temperature set-

points to be adjusted. Control 

temperatures range from 

+33° F / +1° C to +47° F / 

+8° C.

Allows the temperature 

set-points to be adjusted. 

Control temperatures range 

from -6° F / -21° C to +6° F 

/ -15° C.

Toggles display from Fahrenheit 

to Celsius.

Press and hold for three 

seconds to turn off the 

cooling system. It also turns 

off the ice maker and all 

dispenser functions. The 

display will read “power off”.

water filter Displays the current status of 

the water filter (Good, Order,

or Replace). To reset the filter

status to “Good”, press and 

hold the “set” key for three 

seconds.

Displays the current status of 

the air filter (Good, Order, or

Replace). To reset the filter

status to “Good”, press and 

hold the “set” key for three 

seconds.

While in the default option, 

press and hold the set key 

for three seconds to reset all 

refrigerator settings to their 

factory default settings.

set (+ or -) Selects the current menu 

selection option.

Press the “water” key 
to select water. A green 
indicator light will be 
illuminated above the active 
feature.

Press the “cube” key to 
select cubed ice. A green 
indicator light will be 
illuminated above the active 
feature.

Press the “crush” key 
to select crushed ice. A 
green indicator light will be 
illuminated above the active 
feature.



When you first power on the refrigerator,

the temperature displays 0° F and 37° F. 

After a few seconds, both of the displays will 

switch to “HI”. The displays will continue to 

show “HI” for 20 minutes. After 20 minutes, 

the High Temp alarm will sound and both 

displays will show the actual temperature.

  1  Plus (+) and Minus (-) indicators are 

located on the right side of the control 

panel.

  2  Press the + or - indicator to adjust the 

temperature to the desired setting.