Thermador DWHD651JFP 使用とお手入れ
18
1
2
All other images (shown in S:01 and S:02 setting):
All extra info images (shown in S:02 setting only):
Care and Maintenance
Maintenance Tasks
A regular inspection and maintenance of your machine will help to prevent faults.
This saves time and prevents problems.
Wiping up spills and splash-outs
Water may occasionally splash out of your dishwasher, particularly if you interrupt a
cycle or open the dishwasher door during a cycle. To avoid floor damage and possi-
ble mold growth, do not allow areas to remain wet around or under the dishwasher.
This saves time and prevents problems.
Wiping up spills and splash-outs
Water may occasionally splash out of your dishwasher, particularly if you interrupt a
cycle or open the dishwasher door during a cycle. To avoid floor damage and possi-
ble mold growth, do not allow areas to remain wet around or under the dishwasher.
Spray arms
Limescale and contaminants in the rinsing water may block nozzles and bearings on
the spray arms.
Check outlet nozzles on the spray arms for blockages by removing the spray arms as
shown and rinse under running water from faucet.
Limescale and contaminants in the rinsing water may block nozzles and bearings on
the spray arms.
Check outlet nozzles on the spray arms for blockages by removing the spray arms as
shown and rinse under running water from faucet.
Check and clean the filter system
The filter system consists of a coarse filter, a flat fine filter and a micro filter.
The filters keep large foreign objects in the rinsing water away from the pump.
These foreign objects may occasionally block the filters.
Check the filters for residue by:
The filter system consists of a coarse filter, a flat fine filter and a micro filter.
The filters keep large foreign objects in the rinsing water away from the pump.
These foreign objects may occasionally block the filters.
Check the filters for residue by:
• Unscrew filter cylinder as illustrated and take out filter system.
• Remove any residue and clean filters under running water.
• Reinstall filter system in reverse sequence and ensure that the arrow marks
• Remove any residue and clean filters under running water.
• Reinstall filter system in reverse sequence and ensure that the arrow marks
are opposite each other after closing the filter system.
Half Load
Extra Dry
Cycle Complete Water Intake Testing
Delay Start
Glass Protect