Lynx L54PSR2 オーナーマニュアル
32
UNpACKING
p
p
ANd ASSEMBLY
the grill arrives nearly ready
to use and requires only minor
assembly.
By carefully following the
By carefully following the
uncrating and unpacking
steps, you will improve the
uncrating and unpacking
uncrating and unpacking
customer’s first Lynx experi
steps, you will improve the
steps, you will improve the
-
ence.
shipping weight on smaller
shipping weight on smaller
units is app. 300 pounds and
hipping weight on smaller
hipping weight on smaller
larger units may weigh over
units is app. 300 pounds and
units is app. 300 pounds and
500 pounds.
crate & carton:
Important!
do not remove staples
around the top of the
o not remove staples
o not remove staples
carton. these staples
around the top of the
around the top of the
hold a wooden pallet in
hese staples
hese staples
place inside the carton
hold a wooden pallet in
hold a wooden pallet in
that protects the unit from
place inside the carton
place inside the carton
damage. Removing these
that protects the unit from
that protects the unit from
staples may cause the
pallet to fall on the top of
staples may cause the
staples may cause the
grill.
pallet to fall on the top of
pallet to fall on the top of
How to remove the
carton
cut the main strap holding
the grill to the pallet.
ut the main strap holding
ut the main strap holding
Remove the staples at the
bottom
Remove the staples at the
Remove the staples at the
of the carton.
Remove the staples at the
Remove the staples at the
lift off the carton.
with assistance, remove
with assistance, remove
the grill from the pallet and
place into desired location.
the grill from the pallet and
the grill from the pallet and
warning
EXCESSIVE WEIGHT HAZARD!
EXCESSIVE WEIGHT HAZARD!
Use two or more people to
move or install this unit. Fail
Use two or more people to
Use two or more people to
-
ure to follow this instruction
can result in back or other
personal injuries.
the wheels sit down in the
gaps of the shipping crate so
that the grill can sit safely and
gaps of the shipping crate so
gaps of the shipping crate so
solidly on the crate during
shipping. the grill cannot be
slid directly off of the pallet.
shipping.
shipping. he grill cannot be
he grill cannot be
grill off of the pallet is by
lifting one end of the grill
grill off of the pallet is by
grill off of the pallet is by
high enough to place a ramp
under the wheel and then lift
high enough to place a ramp
high enough to place a ramp
the other end while rolling the
grill off of the pallet.
the other end while rolling the
the other end while rolling the
InterIor pac
p
p
KIng
lynx uses stur
ll
dy tie-down
cables and straps to ensure
your grill arrives at your home
cables and straps to ensure
cables and straps to ensure
in the same condition that
it left our factory. Be suRe
you haV
ha
ha e RemoVed all
tie downs BefoRe using
youR gRill.
Remove the white
accessory box and wood
packing, the grill racks, and
remove any loose items
packing, the grill racks, and
packing, the grill racks, and
from the firebox.
emove any loose items
emove any loose items
carefully cut
the cable ties
securing the
warming
rack and
rotisserie
spit (if
equipped).
spit (if
spit (if
cut the strapping that
secures the briquette trays
ut the strapping that
ut the strapping that
and carefully lift them out,
secures the briquette trays
secures the briquette trays
front first.
and carefully lift them out,
and carefully lift them out,
ake
sure you
remember
to remove
the wire
tie-downs on
the burners.
on prosear™ models, cut
and remove ties from the
burner partition on the left
side of the
burner partition on the left
burner partition on the left
pros
burner partition on the left
burner partition on the left
ear™
burner.
packing from
under
the burner cover.)
under
under
ensure that all burners are
properly seated on the
burner valve orifice and
properly seated on the
properly seated on the
sitting level with the legs
in the frame slots and no
sitting level with the legs
sitting level with the legs
side-to-side movement.