Electrolux EI23BC60KS 仕様シート

• 

Product Weight – 342 Lbs.

• 

An electrical supply with grounded three-prong receptacle is required. The 

power supply circuit must be installed in accordance with current edition 

of National Electrical Code (NFPA 70) and local codes & ordinances.

• 

Voltage Rating – 120V / 60 Hz / 15 or 20 Amps

• 

Connected Load (kW Rating) @ 120 Volts = 1.02 kW

• 

Amps @ 120 Volts = 8.5 Amps

• 

Always consult local and national electric & plumbing codes.

• 

Floor should be level surface of hard material, capable of supporting fully 

loaded refrigerator.

• 

When installing refrigerator adjacent to wall, cabinet or other appliance 

that extends beyond front edge of unit, 20" minimum clearance 

recommended to allow for optimum 120° to 180° door swing, providing 

complete drawer / crisper access and removal. (Absolute 4-1/2" 

• 

To ensure optimum performance, avoid installing in direct sunlight or  

close proximity to range, dishwasher or other heat source.

• 

For proper ventilation, front grille MUST remain unobstructed.

• 

Recess electrical outlet when possible.

• 

Water recess on rear wall recommended to prevent water line damage.

• 

Water Pressure – Cold water line must provide between 30 and 100 

pounds per square inch (psi).

• 

Copper tubing with 1/4" O.D. recommended for water supply line with 

length equal to distance from rear of unit to household water supply line 

plus 7 additional feet. Optional Water Supply Installation Kits available.

• 

Adjustable front rollers to assist with door alignment.

• 

Minimum opening of 70-1/4" H x 36" W x 25" D required to allow for ease 

of installation, proper air circulation, and plumbing / electrical connections.

• 

Remove all wall / floor molding prior to installation.

French Door Refrigerator