Frigidaire FGHT1846Q オーナーマニュアル

17

Interior & 

Door Liners

•  Soap and water
•  Baking soda and 

water

Use 2 tablespoons of baking soda in 1 quart of warm

water. Be sure to wring excess water out of sponge 

or cloth before cleaning around controls, light bulb 

or any electrical part.

Door 

Gaskets

•  Soap and water

Wipe gaskets with a clean soft cloth.

Drawers & 

Bins

•  Soap and water

Use a soft cloth to clean drawer runners and tracks.

Glass 

Shelves

•  Soap and water
•  Glass cleaner
•  Mild liquid sprays

Allow glass to warm to room temperature before 

immersing in warm water.

Toe Grille

•  Soap and water
•  Mild liquid sprays
•  Vacuum attachment

Vacuum dust from front of toe grille. Remove 

toe grille (see Installation Instructions). Vacuum 

backside, wipe with sudsy cloth or sponge. Rinse 

and dry.

Exterior & 

Handles

•  Soap and water
•  Non Abrasive Glass 

Cleaner

Do not use commercial household cleaners 

containing ammonia, bleach or alcohol to clean 

handles. Use a soft cloth to clean smooth handles. 

DO NOT use a dry cloth to clean smooth doors.

Exterior & 

Handles
(Stainless 

Steel 

Models 

Only)

•  Soap and water
•  Stainless Steel 

Cleaners

Never use CHLORIDE or cleaners with bleach to 

clean stainless steel.
Clean stainless steel front and handles with non-

abrasive soapy water and a dishcloth. Rinse with 

clean water and a soft cloth. Use a non-abrasive 

stainless steel cleaner. These cleaners can be 

purchased at most home improvement or major 

department stores. Always follow manufacturer’s 

instructions. Do not use household cleaners 

containing ammonia or bleach.
NOTE: Always clean, wipe and dry with the grain 

to prevent scratching. Wash the rest of the cabinet 

with warm water and mild liquid detergent. Rinse

well, and wipe dry with a clean soft cloth.

Replacing 

Light Bulbs

•  Unplug refrigerator
•  Wear gloves 
•  Remove light cover
•  Replace old bulb 
•  Replace light cover
•  Plug in the 

refrigerator

CAUTION: Wear gloves when replacing light bulbs to 

avoid getting cut. Use same wattage when replacing 

bulb