Intel Pentium D 940 HH80553PG0884M ユーザーズマニュアル
製品コード
HH80553PG0884M
Datasheet
101
Balanced Technology Extended (BTX) Boxed Processor Specifications
8
Balanced Technology Extended
(BTX) Boxed Processor
Specifications
The Intel Pentium D processor 900 sequence and the Intel Pentium processor Extreme
Edition 955, 965 will be offered as an Intel boxed processor. Intel boxed processors are
intended for system integrators who build systems from largely standard components.
The boxed processor will be supplied with a cooling solution known as the Thermal
Module Assembly (TMA). Each processor will be supplied with one of the two available
types of TMAs — Type I or Type II. This chapter documents motherboard and system
requirements for both the TMAs that will be supplied with the boxed processor in the
775-land LGA package. This chapter is particularly important for OEMs that
manufacture motherboards for system integrators.
representation of a boxed processor in the 775-land LGA package with a Type I TMA.
illustrates a mechanical representation of a boxed processor in the 775-land
LGA package with Type II TMA.
Note:
Unless otherwise noted, all figures in this chapter are dimensioned in millimeters and
inches [in brackets].
Note:
Drawings in this section reflect only the specifications on the Intel boxed processor
product. These dimensions should not be used as a generic keep-out zone for all
cooling solutions. It is the system designers’ responsibility to consider their proprietary
cooling solution when designing to the required keep-out zone on their system
platforms and chassis. Refer to the Intel
®
Pentium
®
D Processor, Intel
®
Pentium
®
Processor Extreme Edition, and Intel
®
Pentium
®
4 Processor Thermal and Mechanical
Design Guidelines for further guidance.
NOTE: The duct, clip, heatsink and fan can differ from this drawing representation but
the basic shape and size will remain the same.
Figure 25.
Mechanical Representation of the Boxed Processor with a Type I TMA