Prestige PL240 マニュアル

CLEANING & MAINTENANCE

Your hood will not function properly if not cleaned regularly and maintained properly. Clean 

the filters regularly, (at least twice a month or every 24 hours of use) by soaking them in 

soapy water and rinsing them in the dishwasher at the normal cycle. When the filters are re-

moved, the accessible interior of the hood can be cleaned from grease, using again only soap 

and water. Burned out Halogen light bulbs are exchanged in the same way as normal light 

bulbs. Make sure to replace them with the same type and wattage. (Replacement bulbs are 

Par 16, 60 watt, Halogen 115 volt.)** 

Make it a habit to turn on the hood on low speed even when you are boiling water only. 

The cleaning of the outside of the hood depends on the material used as a decorative exte-

rior. For stainless steel and powder coated metals. Clean with soap and water only. Do not 

use abrasive or aggressive chemicals. Check the outside end of the duct at least once a year. 

Make sure that the back-draft-damper hinges are free of grease and move easily. If you have 

an insect screen installed in the ductover, make sure that it is not broken or dislocated. Filters 

are dishwasher safe or you may hand wash with warm soapy water.

- 5 -

Cleaning & Maintenance

Professional Series Hood