Electrolux EW24ID80QS オーナーマニュアル

ページ / 64
4
Feature Overview
H o w   y o u r   d i s h w a s h e r   c l e a n s
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against 
soiled surfaces.  First, the dishwasher drains for a few seconds to remove soils dropped while loading, 
then fi lls with water covering the fi lter area.  Water is then pumped through the spray arms.  Soil particles 
go through and across the fi lter and down the drain as the water is pumped out.  This series of steps are 
repeated as needed.  The number of water fi lls varies with the cycle being used.  
G e t t i n g   S t a r t e d
To run your dishwasher, follow these basic steps:
1.  Load Dishwasher (See Preparing and Loading 
Dishes).
2.  Add detergent (See Dishwasher Dispenser & 
Detergents).
3.  Add Rinse Aid, if needed (See Rinse Aid).
4.  Select desired CYCLE (See Cycle Chart).
5.  Select desired OPTION (See Energy Options).
6.  Run hot water faucet nearest dishwasher until 
water is hot.  Turn water off.
7.  To start, press START pad and close door.
Upper Spray Arm
Adjustable Rack 
Mechanism
Flex Wash
Silverware Basket
Filters
Serial Label 
(located on right 
side of door)
Tub Gasket
Cup Shelves
Soft Grip Rack
Middle Spray 
Arm
Bottom Rack
Stemware 
Holder
Lower Spray 
Arm
Detergent 
Dispenser 
Rinse Aid 
Dispenser
Cutlery Tray
Upper Rack
Interior Light
       NOTE
Racks and Features in your dishwasher model 
may vary in appearance from illustrations in this 
manual