Moen S7170SRS 仕様シート
2-1/2” Max Deck
Thickness
(64mm)
2-1/2”
(64mm)
(91°)
12”
(306mm)
11”
(280mm)
22-3/4”
(579mm)
8-3/8”
(213mm)
2-1/2”
(63mm)
2-1/2”
(63mm)
6-5/16”
(160mm)
4”
(101mm)
5-5/8”
(142mm)
90 DEGREE™
Single Handle High Arc
Kitchen Faucet
Model: S7170 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, 1-1/4” (32mm) MIN. DIA.
S p e c i f i c a t i o n s
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
•
Metal construction with various finishes identified by suffix
•
Single hole mounting
•
Flexible supply lines with 3/8" fittings connect directly to supply stops
•
High arc spout provides height and reach to fill or clean large pots
•
360˚ rotating spout provides ability to install handle on either side
OPERATION
•
Lever style handle
•
Temperature controlled by 100˚ arc of handle travel
FLOW
• Spout flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
• Spout flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
•
•
1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF 61/9
•
Meets Calgreen and Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe Water
• Complies with California Proposition 65 and with the Federal Safe Water
Drinking Act
• ADA
for lever handle
WARRANTY
•
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
to the original consumer purchaser
•
5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 6/13