Zephyr AK8800AG オーナーマニュアル

www.zephyronline.com

1.   Place 8” round adapter on top of power pack and secure with (4) 

M4x8 screws. (FIG 3)

2.   Install optional AK088xAS Stainless Steel Liner under custom hood 

opening.  Review manual included with liner for more details.

3.   If no liner is used cut out an opening in the bottom of the cabinet by 

following the dimensions in (FIG 1).

5.   Lift Power Pack into opening and secure to bottom of cabinet using 

(4) M4 stainless steel screws, (1) in each corner; see (FIG 2).
NOTE: Wood blocking may need to be added to cabinet base if 
additional support is needed.

6.   Install 8” round duct work and seal with duct tape.  Depending on 

the contruction of the custom hood, the duct work may need to be 
installed on top of the Power Pack prior to mounting the Power Pack 
inside your custom hood.

7.   Install electrical.

8.   Remove all packing materials before using Power Pack.             

Switch power on and check for leaks around duct tape.

Front View

Ductwork

minimum 
3/4” wood base

elec.

metal or other non 
combustible material

(4) M4 ss wood screws

(1) in each corner

Front View

Ductwork

minimum
3/4” wood base

elec.

cabinet bottom cut-out size

26 

1/16”       

AK8800Ax      

14 

3/4

”

remove support screw

C/L

C/L

FIG 3