Frigidaire FRS123LS1 インストールガイド

ページ / 23
8.  The site must allow for the easy 
removal of the connector pipe and 
drain hose.
9.  The unit must be installed at a site 
protected from direct sunlight.
Precautions for Installation
Installation at the following sites may cause problems. If you must inevitably install 
2.   Sites with a high concentration of salinity, such as coastal areas.
3.   Sites with sulfuric gas, such as hot water springs.
4.   Sites with high frequency equipment, such as wireless equipment, welding 
machines and medical installations.
5.   Sites with flammable gases or volatile material.
6.   Sites with special environmental conditions.
7.   Laundry rooms.
Indoor Unit
1.  The unit must be installed at a site 
that does not obstruct the flow of 
air.
2.  The site must support the weight of 
the indoor unit.
3.  The site must be easily accessible 
for maintenance and replacement 
of the air filter.
4.  The site must allow for the 
necessary space around the indoor 
figure.
that the unit be installed at the 
flammable gases.
Choosing the installation site
More
More
More
More
Choosing the installation site
the unit at one of these sites, please consult your local distributor beforehand:
1.   Sites with machine oil.
unit, as shown in the sideward 
meter) between the unit and radio 
5.  There should be at least 3 feet (1 
7.  The indoor unit must be at least 7.5 
feet (2.3 meters) from the ground.
6.  It must be far from fire, smoke or 
center.
or television devices. It is ideal 
than 6"
than 5"
than 7.5'
than 5"
Installation warnings:
Installation
1.   Carefully read the installation manual before beginning.
2.   Follow each step as shown.
3.   Observe all local, state, and national electrical codes and by qualified, 
      licensed, authorized personnel only.
4.   Pay attention to danger and safety notices
07