Frigidaire FFSC2323LP オーナーマニュアル

9

To ensure proper installation of 

handles, please review these 

instructions and illustrations 

thoroughly prior to installing the 

handles.

Wear gloves and safety goggles and 

use extreme CAUTION when installing 

these handles. The rounded end of 

the handles may be sharp (some 

models).

Ensure Handle Set Screws

are Facing Each Other

with Doors Closed

  1  Remove handles from carton and 

any other protective packaging.

  2  Position freezer handle end caps 

over upper and lower pre-installed 

shoulder bolts (A) that are fastened 

into door, ensuring the holes for the 

set screws are facing towards the 

refrigerator door.

  3  While holding handle firmly against

door, fasten upper and lower Allen 

set screws (B) with supplied Allen 

wrench.

  4  Repeat steps 2 and 3 to install 

refrigerator handle. Ensure the 

holes for the set screws are facing 

towards the freezer door.



All set screws should be tightened 

and sub-flush (Allen set screw should

be seated just below the surface of 

the end cap) of handle end cap. The 

end caps should be drawn tight to 

freezer and refrigerator doors with 

no gaps.