Hansgrohe 34016001 組み立て手順
3
Installation Considerations
For best results, Hansgrohe recom-
mends that this unit be installed by
a licensed, professional plumber.
Please read over these instructions
thoroughly before beginning instal-
lation. Make sure that you have
all tools and supplies needed to
complete the installation.
This faucet can be used with a
continuous flow water heater if the
flow pressure is at least 20 psi.
mends that this unit be installed by
a licensed, professional plumber.
Please read over these instructions
thoroughly before beginning instal-
lation. Make sure that you have
all tools and supplies needed to
complete the installation.
This faucet can be used with a
continuous flow water heater if the
flow pressure is at least 20 psi.
•
•
•
Technical Information
Recommended water pressure
14.7 - 72.5 psi
Max. water pressure
145 psi
Recommended hot water temp.
120˚ - 140˚ F*
Max. hot water temp
165˚F*
Hole size in mounting surface
1 3/8"
Max. mounting surface depth
1 5/8"
Flow rate – lavatory
1.5 gpm
Flow rate – bidet
2.2 gpm
Cartridge with high temperature limit stop
3/8" supply hoses
3/8" supply hoses
*Please know and follow all applicable local plumbing codes when setting
the temperature on the water heater.
the temperature on the water heater.
34120XX1
34127XX1