Sharp KB6525PS インストール手順

SPECIAL WARNING

INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE THIS INSTALLATION MANUAL FOR LOCAL ELECTRICAL INSPECTOR’S USE.

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CLEARANCES AND DIMENSIONS

For SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the stated

clearances and dimensions on pages 2 and 3. See Figure 1 (for 24") or Figures 3 and 4 (for 30") .

Microwave Drawer

INSTALLATION MANUAL

UNPACKING YOUR MICROWAVE DRAWER

•

Remove all packing

materials from inside

the Microwave Drawer.

DO NOT REMOVE

THE WAVEGUIDE

COVER, which is

located on the top

of the Microwave

Drawer.

•

Remove the feature

sticker, if there is one.

Check the drawer for

any damage, such as

misaligned or bent

drawer, damaged drawer seals and sealing surfaces, broken

or loose Microwave Drawer guides and dents inside the cavity

or on the front side of the drawer. If there is any damage, do

not operate the Microwave Drawer and contact your dealer or

a SHARP AUTHORIZED SERVICER.

IMPORTANT NOTES TO THE INSTALLER

•

Read all of the Installation Manual before installing the

Microwave Drawer.

•

Remove all packing material before connecting the electrical

supply.

•

Observe all governing codes and ordinances.

•

Be sure to leave these instructions with the consumer.

IMPORTANT NOTES TO THE CONSUMER

Keep this manual with your Operation Manual for future

reference.
• As when using any microwave oven generating heat, there are

certain safety precautions you should follow. These are listed

in the Operation Manual. Read all and follow carefully.

• Be sure your Microwave Drawer is installed and grounded

properly by a qualiﬁed installer or service technician.

IMPORTANT SAFETY INSTRUCTIONS

If the information in this manual is not followed

exactly, a ﬁre or electrical shock may result that could cause

property damage, personal injury or death.

To reduce the risk of tipping, the Microwave

Drawer must be secured by a properly installed Anti-Tip

block.
• This Microwave Drawer must be electrically grounded in

accordance with local codes.

• Make sure the wall coverings and the cabinets around the

Microwave Drawer can withstand the heat generated by the

Microwave Drawer.

Never leave children alone or unattended in

the area where a Microwave Drawer is in use. Never leave the

drawer open when the microwave is unattended.

Stepping, leaning or sitting on the drawer

may result in serious injuries and can also cause damage to the

Microwave Drawer.
• Do not use the Microwave Drawer as a storage space.

This creates a potentially hazardous situation.

• Check that the time-of-day is in the display. If not, touch

Stop/Clear to prevent unintended use.

Waveguide

cover

Sealing

surface

Oven

cavity

Sealing

surface