Monogram ZV925SLSS インストール手順
13
Installation Instructions
STEP 3 CUT DUCT TO LENGTH FOR
VENTED INSTALLATION
• Measure from
house duct to
exhaust opening.
exhaust opening.
• Cut the 8
″ duct
length to size.
• Slip duct over the
exhaust opening.
• Seal the connection
with duct tape.
Duct
House
duct
Frame
height
height
Duct
length
STEP 4 INSTALL THE SUPPORT FRAME
• Raise the support toward
the ceiling.
• Thread the house wiring
through one of the large
holes, preferably on the
left side.
holes, preferably on the
left side.
• Carefully engage the
ceiling mounting screws
to the keyhole slots AND
the house duct in the top
of the frame.
to the keyhole slots AND
the house duct in the top
of the frame.
• Tighten the 4 mounting
screws against the frame.
• Install 2 safety screws.
• Use duct tape to seal the
• Use duct tape to seal the
duct connection at the top.
Duct
Keyhole
slots
Safety
screws
House
wiring
STEP 5 INSTALL HOOD ATTACHMENT
SCREWS
• Install 4 hood attachment screws in the bottom
of the support as shown. Leave 1/4
″ gap between
screw head and support flange.
Install 4
attachment
screws
Keyhole
slots
INSTALLATION—VENTED TO THE OUTSIDE